3.03 / 3.04

z

3.03 – Settings and Input wiring for current output DAC, dual mono, single ended, 1mA full scale current, 0V reference voltage

Known examples of DAC’s requiring these settings are Burr Brown PCM56, PCM58, PCM1702 & PCM1704 as well as Analog Devices AD 1851, AD1856, AD1860, AD1861 & AD1862.

 

This type of DAC requires the following jumper settings:

 

 

The input connections should follow the Scheme shown underneath:

 

All Ground connections and the Vcom connections must be made to the respective channels
DAC’s Analogue Ground Pins.

 

3.04 – Settings and Input wiring for current output DAC, dual mono, single ended, 2mA full scale current, 0V reference voltage

 

A known example of a DAC requiring these settings is the Burr Brown PCM63.

 

This type of DAC requires the following jumper settings:

 

 

The input connections should follow the Scheme shown underneath:

 

All Ground connections and the Vcom connections must be made to the respective channels
DAC’s Analogue Ground Pins.